Prime Hot Rolled Steel Strip
1. Thickness: 1.0~7.0mm; Width: Mill edge 59~800mm.
2. According to China standard: GB700-88 and GB/T 8164-1993
Slit edge: Width tolerance: +/-0.5mm; Thickness tolerance: +/-0.18mm, no tongue and no tail.
Mill edge: Width tolerance: +/-1.8mm; Thickness tolerance: +/-0.18mm, no tail.
3. I. D.: 500mm (slit edge: 508mm)
4. Coil Weight: 0.7~3.5MT
5. Packing: Mill's standard exports packing,
Mill edge: 4 steel strapping and 2 wire rod through coil eye, 1 steel strapping on the coil circumference; 3-4 strips to be bundled into a bigger coil, each package is max. 3MT
Slit edge: 6 steel strapping through coil eye, 1 steel strapping on the coil circumference; 3-4 strips to be bundled into a bigger coil, and strongly strapped by edge protection; Each package is max. 3MT
6. Min. Order for per size: 50MT
7. Steel grade: Q195, Q195L, Q215, Q235, SPHC, SPHD, 08AL, SS300, SS400, SS490, SAE1006, SAE1008, S235JR, X60, CCSA
8. End application: Welding pipe making, c-channel, steel rims, storage rack, etc.
Cold rolled steel strips
-Bright Steel Strip
-Black Annealed Steel Strip
-Cold Hardened Steel Strip
1. Quality/Industry: Temper Rolled (Full Hard, Half Hard, Quarter Hard), Drawing, Deep Drawing, Extra deep drawing, Mediums High Carbon Or equivalent materials.
2. Available Specification: BS/DIN/ASTM/JIS and equivalent
3. Thickness: 0.4mm-2.5mm Thickness Tolerance: +/-0.015mm
4. Width: 31mm - 900mm
5. I. D.: 500mm (slit edge: 508mm)
6. Coil Weight: 0.7~3.5MT
7 Packing: Mill's standard exports packing,
Mill edge: 4 steel strapping and 2 wire rod through coil eye, 1 steel strapping on the coil circumference; 3-4 strips to be bundled into a bigger coil, each package is max. 3MT
Slit edge: 6 steel strapping through coil eye, 1 steel strapping on the coil circumference; 3-4 strips to be bundled into a bigger coil, and strongly strapped by edge protection; Each package is max. 3MT
8. Min. Order for per size: 20MT
Hot dipped galvanized steel strips
1. Supply Condition: Non Skin-Passed (regular/small spangle) and Skin Passed (suppressed/zero spangle)
2. Available Specification: DIN/ASTM/JIS/EN and equivalent. In full hard, semi hard and soft quality (commercial grade, lock forming grade and structural grade)
3. Zinc Coating: 90 g s m to 275 g s m
4. Thickness: Hard Coils 0.14mm to 3.00mm (CR based)
Hard Coils 1.51mm to 3.00mm (HR based)
Soft Coils 0.20mm to 3.00mm (CR based)
Soft Coils 1.51mm to 3.00mm (HR based)
5. Width: 32mm-750mm
6. Coil Wt: 1 metric tons to 3 metric tons maximum
7. Surface Finish: Bright Dull.
Surface finish |
Pattern: |
Application: |
Regular spangle |
Standard spangles with flower pattern |
General uses |
Minimized spangle |
Minimized spangles than regular |
General painting application |
Zero spangle |
Extremely minimized spangles |
Special painting application |